View W2042S_143919.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

User's Guide
W1942S W2042S W2242S
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
www..com
See the label attached on the product and give the information to your
dealer when you ask for service.
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement. The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation. Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer. Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement. Do not Open the Display. There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly. To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured. www..com Use only a stand recommended by the manufacturer. Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen. It can cause injury to human, problem to product and damage the display. To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house. Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this display. When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. It can cause electric shock. A1
Important Precautions On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER: Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material. Place the display near or over a radiator or heat source. Main power breaker is the power cord and this breaking device must be located at a location where it is easy to operate. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently. Do not press the LCD screen with your finger for a long time as this may cause some afterimages. Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance. If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel.
On Cleaning
www..com Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
Unplug the display before cleaning the face of the display screen. screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.
A2
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.
Connecting the stand
1. Place the monitor with its front facing downward on a soft cloth. 2. Assemble the Stand Body into the product in the correct direction as shown in the picture.
Make sure you push it until you hear it "click".
Hinge Body
Stand Body
3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.
Stand Base
www..com Stand Body
4. Tie down the base lock to perpendicularity direction. 5. Once assembled take the monitor up carefully and face
the front side
Important This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.
A3
Connecting the Display Disassembling the stand
1. Put a cushion or soft cloth on aflat
surface.
2. Place the monitor face Down on
the cushion or soft cloth.
3.
Change your lock on the product as it follows and turn it in the arrow direction.
If you can't release the stand base even the locking knob is at a release position, Please push the indicated knob down and retry it.
www..com
A4
Connecting the Display
4. Pull out the Stand to remove.
5. Pushing the PUSH button, Take the stand base from stand body.
Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
www..com
Tilt Range : -5~20
20
Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees.
A5
Connecting the Display Using the Computer
1.Make sure to turn off the computer and product. Connect the cable as below sketch map
form 1 to 2 .
A Connect Dsub Cable (PC) B Connect Dsub Cable (Mac)
Power Cord
Analog signal D-sub
PUSH
Wall-outlet type
2
1
PC
PC-outlet type
PC
MAC
A
B
For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) Dsub VGA connector on the supplied cable to a 15 pin 2 row connector.
Mac adapter
www..com
2.Press
button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.
NOTE
` Self Image Setting Function'? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. `AUTO/SET' Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.
A6
Control Panel Functions Front Panel Controls
Control 4:3 in Wide
Function To select the image size of the screen.
WIDE
4:3
* 4:3 : Depending on the input video signal ratio, it is automatically changed to an optimized screen ratio.
www..com
MENU Button
Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.
A7
Control Panel Functions
Control Buttons Function Use these buttons to select or adjust functions in the On Screen Display. For more information, refer to page A15.
AUTO/SET Button
Use this button to enter a selection in the On Screen Display.
AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is - 19 inch monitor : 1440 x 900 - 20.1/22 inch monitor : 1680 x 1050
www..com
Power Button
Use this button to turn the display on or off. This Indicator lights up blue when the display operates normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to amber.
Power Indicator
A8
On Screen Display (OSD) Control Adjustment Screen Adjustment
Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
MENU
AUTO/SET
MENU
Press the MENU Button, then the main menu of the OSD appears. To access a control, use the or Buttons. When the icon you want becomes highlighted, press the AUTO/SET Button. Use the / Buttons to adjust the image to the desired level. Use the AUTO/SET Button to select other sub-menu items. Push the MENU Button once to return to the main menu to select another function. Push the MENU Button twice to exit from the OSD.
www..com
A9
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment, and setting menus.
Main menu PICTURE Sub-menu BRIGHTNESS CONTRAST GAMMA COLOR PRESET RED GREEN BLUE HORIZONTAL VERTICAL TRACKING CLOCK PHASE SHARPNESS SETUP LANGUAGE OSD
HORIZONTAL
A
Reference To adjust the brightness, contrast and gamma of the screen To customize the color of the screen
sRGB 6500K 9300K
To adjust the position of the screen To improve the clarity and stability of the screen
POSITION VERTICAL
To customize the screen status for a user's operating environment
WHITE BALANCE
www..com
POWER INDICATOR FACTORY RESET MOVIE INTERNET USER NORMAL DEMO : Adjustable A : Analog Input
FLATRON F-ENGINE
To select or customize desired image settings
NOTE The order of icons may differ depending on the model (A10~A15).
A10
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears.
Main Menu
MENU : Exit - + : Adjust (Decrease/Increase) SET : Enter : Select another sub-menu
Button Tip Menu Name
Icons
www..com
Sub-menus
NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual.
A11
On Screen Display(OSD) Selection and Adjustment
Main menu
PICTURE
Sub menu
Description
PICTURE
BRIGHTNESS To adjust the brightness of the screen.
CONTRAST GAMMA MENU : Exit - : Decrease + : Increase SET : Select another sub-menu
To adjust the contrast of the screen. Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images.
COLOR
COLOR
PRESET Select the screen color. * sRGB: Set the screen color to fit the SRGB standard color specification. * 6500K: Slightly reddish white. * 9300K: Slightly bluish white. Set your own red color levels. Set your own green color levels. Set your own blue color levels.
www..com
RED GREEN
MENU : Exit BLUE - : Decrease + : Increase SET : Select another sub-menu
A12
On Screen Display(OSD) Selection and Adjustment
Main menu
TRACKING
Sub menu
Description
TRACKING
HORIZONTAL To move image left and right. VERTICAL To move image up and down.
CLOCK
To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. To adjust the clearness of the screen.
PHASE MENU : Exit - : Decrease + : Increase SET : Select another sub-menu
SHARPNESS
www..com
A13
On Screen Display(OSD) Selection and Adjustment
Main menu
SETUP
Sub menu
LANGUAGE
Description
To choose the language in which the control names are displayed. To adjust position of the OSD window on the screen. If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on. Restore all factory default settings except "LANGUAGE." Press the - button to reset immediately.
SETUP
OSD POSITION WHITE BALANCE
POWER INDICATOR
MENU : Exit - : Adjust + : Adjust SET : Select another sub-menu
FACTORY RESET
If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only when the input signal is an analog signal.
www..com
A14
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you touch the on the left side of the monitor.
Menu Name Icons Sub-menu Name
button
Main menu
Sub menu
Description
MOVIE This feature lets you easily select the best desired INTERNET image condition optimized to the environment (ambient illumination, image types etc). MOVIE: For animation images in videos or movies INTERNET: For text images (Word processing etc.)
USER
User You can manually adjust brightness, ACE or RCM. You can save or restore the adjusted value even when using a different environment.
... (Brightness): Adjusts screen brightness. ...ACE(Adaptive Clarity Enhancer): Selects the clarity mode. ...RCM(Real Color Management): Selects the color mode.
0 1 2
www..com
3
Not applied Green enhance Flesh tone Color Enhance
Select the sub-menu using the AUTO/SET button and save the YES value using the , buttons. NORMAL This is under normal operating conditions. DEMO This is just for advertising to customer in the shops. It's setting is same with Movie mode and screen is divided by half.
A15
Troubleshooting
Check the following before calling for service.
No image appears
Is the power cord of the * Check and see if the power cord is connected properly to the power outlet. display connected? Is the power on and the * Adjust the brightness and the contrast. power indicator blue or green? Is the power indicator amber? * If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. * Try to turn on the PC.
Do you see an "OUT OF * This message appears when the signal from the PC (video card) is out of horizontal or vertical RANGE" message on frequency range of the display. See the the screen? 'Specifications' section of this manual and configure your display again. Do you see a "CHECK SIGNAL CABLE" message on the screen?
www..com
* This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again.
Do you see a "OSD LOCKED" message on the screen?
Do you see "OSD LOCKED" when you push MENU button? * You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message "OSD UNLOCKED" will appear.
A16
Troubleshooting
Display image is incorrect
Display Position is incorrect. * Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display.
On the screen background, vertical bars or stripes are visible.
* Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display. * Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. * Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color).
Any horizontal noise appearing in any image or characters are not clearly portrayed.
www..com
Important
Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. Reasons for Recommending Optimal Resolution : The aspect ratio is 16:10. If the input resolution is not 16:10 (for instance, 16:9, 5:4, 4:3), you might encounter problems such as blurred letters, blurry screen, cut-off screen display or tilted screen. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.
A17
Troubleshooting
Display image is incorrect
The screen color is mono or abnormal. * Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. * Make sure the video card is properly inserted in the slot. * Set the color setting higher than 24 bits (true color) at Control Panel - Settings.
The screen blinks.
* Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
Have you installed the display driver?
Have you installed the display driver? * Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. * Make sure to check if the video card supports Plug&Play function.
Do you www..com see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
A18
Specifications
Display
W1942S
19 inches (48.14 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0.285*0.285 mm pixel pitch Horizontal Freq. Vertical Freq. Input Form 28 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) 15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm) VESA 1440 x 900 @ 75 Hz VESA 1440 x 900 @60 Hz : 36W(Typ.) 1W 1W
Sync Input
Video Input
Signal Input Input Form
Resolution
Max Recommend
Plug&Play Power Consumption Dimensions & Weight
DDC 2AB On Mode Sleep Mode Off Mode
www..com
Tilt Range Power Input Environmental Conditions
With Stand Without Stand Width 44.84 cm / 17.65 inches 44.84 cm / 17.65 inches Height 38.33 cm / 15.09 inches 30.07 cm / 11.84 inches Depth 19.84 cm / 7.81 inches 6.32 cm / 2.49 inches Net 4.1 kg (9.11 lbs) Tilt -5~ 20 AC 100-240V~ 50/60Hz 0.8A Operating Conditions Temperature 10C to 35 C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20C to 60 C Humidity 5 % to 90 % non-Condensing Attached ( ), Detached ( O ) Wall-outlet type or PC-outlet type
Stand Base Power cord
NOTE Information in this document is subject to change without notice.
A19
Specifications
Display
W2042S
20.1 inches (51.11 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 20.1 inches viewable 0.258*0.258 mm pixel pitch Horizontal Freq. Vertical Freq. Input Form 28 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) 15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm) VESA 1680 x 1050 @60 Hz VESA 1680 x 1050 @60 Hz : 40W(Typ.) 1W 1W
Sync Input
Video Input
Signal Input Input Form
Resolution
Max Recommend
Plug&Play Power Consumption Dimensions & Weight
DDC 2AB On Mode Sleep Mode Off Mode Width Height Depth Net Tilt
With Stand Without Stand 47.39 cm / 18.66 inches 47.39 cm / 18.66 inches 39.04 cm / 15.37 inches 31.89 cm / 12.56 inches 19.84 cm / 7.81 inches 6.29 cm / 2.48 inches 4.5 kg (10 lbs) -5~ 20
Tilt Range Power Input www..com Environmental Conditions
AC 100-240V~ 50/60Hz 1.0A Operating Conditions Temperature 10C to 35 C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20C to 60 C Humidity 5 % to 90 % non-Condensing Attached ( ), Detached ( O ) Wall-outlet type or PC-outlet type
Stand Base Power cord
NOTE Information in this document is subject to change without notice.
A20
Specifications
Display
W2242S
22 inches (55.868 cm) Flat Panel Active matrix-TFT LCD, Anti-Glare coating 22 inches viewable 0.282*0.282 mm pixel pitch Horizontal Freq. Vertical Freq. Input Form 28 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) 15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm) VESA 1680 x 1050 @60 Hz VESA 1680 x 1050 @60 Hz : 40W(Typ.) 1W 1W
Sync Input
Video Input
Signal Input Input Form
Resolution
Max Recommend
Plug&Play Power Consumption Dimensions & Weight
DDC 2AB On Mode Sleep Mode Off Mode Width Height Depth Net Tilt
With Stand Without Stand 51.57 cm / 20.30 inches 51.57 cm / 20.30 inches 41.80 cm / 16.46 inches 34.46 cm / 13.57 inches 20.94 cm / 8.24 inches 6.31 cm / 2.48 inches 4.65 kg (10.33 lbs) -5~ 20
Tilt Range Power Input www..com Environmental Conditions
AC 100-240V~ 50/60Hz 1.0A Operating Conditions Temperature 10C to 35 C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20C to 60 C Humidity 5 % to 90 % non-Condensing Attached ( ), Detached ( O ) Wall-outlet type or PC-outlet type
Stand Base Power cord
NOTE Information in this document is subject to change without notice.
A21
Specifications Preset Modes (Resolution)
19 inch monitor
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 *15 16
640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 1440 x 900 1440 x 900 1440 x 900
31.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.123 68.681 61.805 63.981 79.976 55.500 55.935 70.635
70 70 60 75 60 75 75 60 75 75 65 60 75 60 60 75 *Recommend Mode
20.1/22 inch monitor
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1 2 3 4 5 6 www..com 7 8 9 10 11 *12
720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1680 x 1050 1680 x 1050
31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 63.981 79.976 64.674 65.290
70 60 75 60 75 60 75 75 60 75 60 60 *Recommend Mode
Indicator
MODE LED Color
On Mode Sleep Mode Off Mode
blue amber Off A22
Installing the Wall mount plate
This monitor satisfies the specifications of the Wall mount plate or the interchange device.
1. Place the monitor with its front facing downward on a soft cloth.
2. Separate the stand by pushing the PUSH button.
3.
Install the Wall mount plate.
Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased. www..com
Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores.
A23
Digitally yours
www..com

▲Up To Search▲

Price & Availability of W2042S

	To Download W2042S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .